The Stage 3 ULTRACHARGER kit is designed to function within the confines of the OEM CTS-V motor also. However to achieve the true potential of this system it is seriously recommended that the engine/short block be built to handle the additional output of the Stage 3 ULTRACHARGER.
This is the big bad brother to the Stage 2 ULTRACHARGER System, THE Stage 3. Designed to be the pinnacle of bolt on blower performance, THE Stage 3 will not leave you yearning for more. We are talking about 3.6L worth of displacement through the ULTRACHARGER sitting on top of a motor no smaller than 6.2L. This is more than half of the displacement of your OEM motor sitting on top of it feeding the engine. In other words you have a V6 CTS base motor feeding your engine!!!
Why does size matter? If we use this example of the supercharger spinning (2) revolutions for every (1) engine revolution the breakdown would be as follows:
OEM supercharger of 1.9L will generate 3.8L worth of compressed air for every 1 engine revolution. Whereas the 3.6L will generate 7.2L worth of compressed air in that same single engine revolution! The results of moving this much air is the potential to generate up to 1200BHP. Yes, we said 1200BHP.
In typical D3 fashion this system will be a complete system ready for installation. The best part about all of this is that it will bolt into place without any major modifications or permanent modifications to the vehicle. The kit comes with all components and hardware required for installation.
Just because we have added copious amounts of power and torque that we forgot one second about the fact that this is a Cadillac. The driveability will remain sophisticated and refined with an aggressive edge. Our attention to detail is unmatched.
The Stage 3 ULTRACHARGER Kit is made to fit the D3 Motorsport Bonnet and is comprised of the following key components:
NOTE: Select components may be changed out depending on your individual requirements and or specifications.